1. Product Introduction of 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery
This product is suitable for electric bicycles with rated voltage 48V and rated power ≤ 800W. The battery pack (according to QBT 2947.3-2008 standard) is composed of 18650 cells in series and parallel connection (including protection board). The battery pack has the characteristics of green environmental protection, strong kinetic energy, high energy ratio, ultra long cycle life and safe use.
60V 20AH Electric Motorcycle 18650 Lithium Ion Battery has excellent cycle performance and high safety. 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery is mainly applied to electric bicycles, tricycles and other electric vehicles. The battery module is comprised of soft-packed battery cells in series and battery protection module is included to ensure supreme reliability.
During battery service, the discharge capacity of the battery is called discharge depth as a percentage of its rated capacity. The discharge depth is closely related to the charge life of the secondary battery (accumulator or rechargeable battery). The deeper the discharge depth of the secondary battery is, the shorter the charging life of the battery is. Therefore, avoid the deep discharge.
The lead-acid battery can be deeply charged and discharged in 400 cycles and has a service life of about two years. Lithium-ion batteries are more durable and wear down more slowly. Charge and discharge more than 500 times, life of 4-5 years.
Lithium ion battery has no memory effect, charge and discharge depth does not affect the capacity of the battery, easy to use.
2. Product Parameter (Specification) of 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery
Product Name
Brand
Chilwee
Model
CC6020AV
Rated Voltage
60 V
Rated Capacity
20 Ah
Charging Voltage
71.4±1V
Discharge Cut Off Voltage
51±0.5V
Standard Charge Current
4A
Maximum Charging Current
10A
Standard Discharge Current
10A
Maximum Continuous Discharge Current
25A
Impedance (Max, at 1000Hz.)
≤120mΩ
Shell Material
ABS+PC
Weight
7.6±0.2Kg
Monthly Self Discharge Rate
≤5%
Dimension (mm)
230X170X180mm
Cycle Life
500 DOD≥70%
Charging Mode (CC / CV)
3A×7.5h
Charging Temperature
0℃~45℃
Discharge Temperature
-20℃~60℃
Factory Voltage
65±2V
Place of Origin
China
Lithium battery
3. Product Advantages of 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery
1) Battery dimension compatible with multiple luxury vehicle models.
2) Complete holder design inside battery, safe in use and consistent in quality.
3) Automotive level cell, strong power, long voyage, long life.
4) Dust and water proof level IP67, safe and durable.
5) Installed with battery fault detection socket at 1s indentification.
Material: MnNiCo Ternary Material + LiMn2O4
4. Product Features of 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery
1) One third the weight of an equivalent lead acid battery.
2) Over 2000 deep discharge cycles compared to typically around 300 for lead acid.
3) More usable capacity than that of similar amp hour lead acid batteries.
4) High discharge rate capability, 10C continuous, 20C pulse discharge.
5) Unlike lead acid batteries, can be left in a partially discharged state for extended periods without causing permanent damage.
6) Extremely low self discharge rate, about 1~2% per month.
7) Does not suffer from "thermal runaway". It is be accuse there is a special component called PTC insertion (Positive temperature Coefficient). When temperature gets too high, PTC refrigerates by augmenting its resistance, then current steps down until interior temperature gets normal.
8) Can be used safely in wide ambient temperatures of -20 to 60 deg. C without any degradation in performance.
9) Can be connected in series for higher voltages or parallel for higher capacity.
10) Maintenance free.
11) Does not contain any toxic heavy metals such as lead, cadmium, nor any corrosive acids or alkalis thus making LiFePO4 batteries the most environmentally friendly battery chemistry available.
5. Product Safety Recommendations of 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery
1) The SOA of Lithium Ion cells is bound by current, temperature and voltage.
2) 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery may get damaged and may burst into flames if over charged above a recommended voltage.
3) It may get damaged if allowed to be discharged below a recommended cut-off voltage.
4) It may get drastically reduced if operated beyond recommended temperature range.
5) It may get reduced if discharged at too high current or charged too fast.
6) To prevent the voltage of any cell exceeding the limit.
7) To prevent the temperature of any cell exceeding the limit.
8) To prevent voltage dropping of any cell below a certain limit.
9) To prevent the charging current from exceeding the limit.
10) To prevent the discharging current from exceeding the limit.
6. Product Qualification of the 60V 20AH Electric Motorcycle 18650 Lithium Ion Battery
7. FAQ
Q1 How long is your delivery time?
A1 Generally speaking, the whole production cycle from raw materials to finished products takes 15 days, but we can deliver the goods within 7 days, and we can change it according to the quantity or other conditions, because we have the stock of raw materials for semi-finished products.
Q2 Are you trading company or manufacturer?
A2 We are CHILWEE original factory, So the price has an advantage.
Q3 Product life?
A3 Our products are maintenance free and sealed, and advanced technology is adopted, with long service life and no problems in normal use.
Q4 Difficulty of product use?
A4 It is easy to use, Please operate according to the manual.
Q5 Are your parameters true?
A5 All our parameters are real, with the highest quantity, competitive price and long life cycle.
Q6 OEM Service?
A6 If your purchase quantity reaches a certain quantity, we can also print your trademark on the battery box.
Q7 What is your MOQ?
A7 The minimum order quantity is measured by what product.
Q8 What is your term of payment?
A8 The time limit of payment needs to be communicated, and the contract should be drawn up according to the time limit stipulated in the contract.
Q9 What is your products standardization?
A9 First, according to Chinese standards, and then international export standards.
Q10 How long it takes you to provide the designing options for us?
A10 It depends on your design requirements and needs to be judged according to the degree of difficulty.